Zero Friction Coatings Market Analysis by Key Companies – Endura Coatings, DuPont, VITRACOAT, Poeton, Bechem

-

 The global zero friction coatings market is anticipated to hold a market value of US$ 879 Million in 2023 and US$ 1,575.59 Million by 2033. The projected growth rate is nearly 6% during the forecast period from 2023 to 2033. Growth can be attributed to the fact that these coatings reduce friction and wear resulting in low fuel consumption and less heat generation. According to the European Automobile Manufacturers’ Association, 79.1 million motor vehicles were produced across the globe in 2021 which was up by 1.3% as compared to 2020. Zero friction coatings can extend the time between component maintenance and replacement, especially for machine parts that are expensive to manufacture.

Several applications in the automobile industry use wear-resistant plastic seals that require zero tolerance for failure and lifetime service confidence. Increasing demand for the product from the automotive industry across the globe for various applications including fuel pumps, automatic transmissions, oil pumps, braking systems, and others is expected to drive its demand over the forecast period. Low friction coatings can be used in extreme environments comprising high pressure, temperatures, and vacuums. These coatings can provide improved service life and performance thereby eliminating the need for wet lubricants in environments that require chemicals, heat, or clean room conditions. The products containing molybdenum disulfide (MoS2) are suitable for reinforced plastics while those free from MoS2 are suitable for non-reinforced plastics.

Get an overview of market drivers and challenges affecting this industry: https://www.futuremarketinsights.com/reports/sample/rep-gb-15934

Zero friction coatings are paint-like products containing submicron-sized particles of solid lubricants dispersed through resin blends and solvents. The product can be applied using conventional painting techniques such as dipping, spraying, or brushing. The thickness of the film has a considerable influence on the anti-corrosion properties, coefficient of friction, and service life of the product. Its thickness should be greater than the surface roughness of the mating surfaces.

Key Takeaways from Market Study

  • In 2022, molybdenum disulfide emerged as the dominant type segment by contributing around 50% of the revenue share.
  • The automobile & transportation was the dominating end-use segment accounting for a revenue share of more than 35% in 2022 due to the rapid growth of the automotive industry across the globe.
  • The energy end-use segment is anticipated to grow at a CAGR of 5.7% in terms of revenue by 2033.
  • In Asia Pacific, the market is projected to witness the highest CAGR of 5.8% over the predicted years.

“Properties of zero friction coatings such as vacuum & radiation resistance, dry and clean lubrication that is not affected by dust, non-flammability, and no oxidation are predicted to foster the product demand over the forecast period,” says an analyst at Future Market Insights.

Are you looking for deep information related to the latest trends, drivers, and challenges? Speak to Our Analyst @ https://www.futuremarketinsights.com/ask-question/rep-gb-15934

Key Market Players

Major players are channelling efforts toward expanding their production capacities to strengthen their market share and cater to the growing demand. Market expansion is anticipated to be aided by the growing number of partnerships and collaborations among key players that are looking to increase their presence in the market. Key players in the zero friction coatings market are Endura Coatings; DuPont; VITRACOAT; Poeton; Bechem; ASV Multichemie Private Limited; GMM Coatings Private Limited; and IKV Tribology Ltd. Some of the recent key developments among key players are:

  • In June 2020, Poeton Industries launched the latest in a long line of ground-breaking surface treatments. The Gloucester based company has launched Apticote 480A, a new composite coating that combines the properties of nickel and fluoropolymer materials into one problem-solving solution. The new advanced coating builds on the strong Poeton history of developing innovative solutions. The treatment has been created in the Poeton Research & Development Laboratory led by Dr John Archer and builds on the success of existing nickel-polymer treatments.

More Valuable Insights 

Future Market Insights, in its new offering, presents an unbiased analysis of the global zero friction coatings market, presenting historical analysis from 2018 to 2022 and forecast statistics for the period of 2023-2033.

The study reveals essential insights on the basis of Type (Polytetrafluoroethylene, Molybdenum Disulfide), By Application (Aerospace, Energy), & Region.

Key Market Segments Covered in the Global Zero Friction Coatings Market

By Type:

  • Polytetrafluoroethylene
  • Molybdenum Disulfide
  • Others

By Formulation:

  • Solvent-based Coatings
  • Water-based Coatings
  • Powder Coatings

By End Use:

  • Automobile & Transportation
  • Aerospace
  • General Engineering
  • Food & Healthcare
  • Energy
  • Others

Region:

  • North America
  • Latin America
  • Europe
  • Asia Pacific
  • Middle East & Africa

Comments

Post a Comment

Popular posts from this blog

Thionyl Chloride Market Size, Share, Revenue Demand & Growth by 2034

-
Heightening concerns related to water treatment are likely to further fuel its growth engine in the near term. According to the latest report by FMI, the global  thionyl chloride market  is expected to reach a valuation of US$ 829.9 million by 2034. The industry is expected to experience revenue growth at a moderate CAGR of 4.8% during the forecast period. Thionyl chloride is used in various end-use industries such as agrochemicals, pharmaceuticals, dyes & pigments, and organic synthesis. The rising adoption of pesticides in developing countries and developments in the pharmaceutical industry are expected to drive the growth of the thionyl chloride market over the forecast period. However, a majority of end users of thionyl chloride are facing a massive slowdown due to the coronavirus (COVID-19) pandemic. This is substantially widening the supply-demand gap, and, as such, straining the revenue pool of the thionyl chloride market. Further, China – the epicenter of the pandemic – is
Read more

Bonded Magnet Market Size, Share, Revenue Demand & Growth by 2034

-
  The  bonded magnet market size  is projected to be around US$ 2,597.40 million in 2024. The demand for bonded magnets is anticipated to expand at a CAGR of 4.80% through 2034. The industry is projected to surpass US$ 4,150.99 million by 2034. The bonded magnet industry is primarily driven by the increasing demand for miniaturization and lightweight components in various applications such as automotive, consumer electronics, and medical devices. The rising focus on sustainability and environmental concerns has propelled the adoption of bonded magnets, which are manufactured using environmentally friendly processes and materials. One of the latest trends in the bonded magnet industry is the development of hybrid magnet systems combining bonded magnets with other materials like plastics or composites. These hybrid systems offer unique properties and performance characteristics, catering to specific application requirements such as weight reduction or thermal stability. One significa
Read more

Construction Chemicals Market Potential Growth, Size, Share, Demand And Analysis Of Key Players – Research Forecasts To 2031

-
 The essential nature of construction chemicals in the construction and engineering sector is expected to support market growth for the duration of the assessment period from 2021 to 2031. In a new market report, Future Market Insights (FMI) has stated the valuation of the market at US$ 39 Bn in 2020.  Construction chemicals  play critical roles in construction projects including coatings, additives, sealants and more. Affordable housing and smart city projects are major influencers of demand. Strong demand for concrete admixtures, plasticizers in particular is driving the growth of the construction chemicals market. The high degree of workability in areas requiring high levels of reinforcement in high rise buildings and public infrastructure projects will support sales prospects in the coming years. The Asia Pacific excluding Japan region is expected to remain dominant. Major urbanization projects and substantial manufacturing facilities in China are likely to aid expansion of the
Read more